Walnut Dining Table I Am Making A Walnut Dining Room Table 4x6 Ft What Stain Would Be The Best To Make The Grain And Natural Look?

I am making a Walnut Dining room table 4x6 ft what stain would be the best to make the grain and natural look? - walnut dining table

I come from an antique walnut chest of drawers painted and tried to reach the original goal has been damaged by water in some areas, seat I mixed black walnut and mahogany, and tested on a piece of wood until I get the color I wanted, and then colored bottom cleaned, and I would put at least five layers of polyethylene on the table. Even a tabel and chairs oak restored, five layers on the table top and three layers in the seats of the presidency. Good luck with your project. Maybe you just want to COP on natural wood also ....

8 comments:

jkduehri... said...

Walnut is very dark at the beginning, and I do not know if a patch changes color in general. I would like to apply a high gloss poly and scratch at least 4 layers of the surface with steel wool to the surface between the layers.

James A said...

If the wood is new and has a good texture, I wipe it with linseed oil, so that stresses in the grain (dry) layer with several layers of poly.

If the grain is not as good or stains, use a good quality wipeing stain to the color match, then poly coat.

James A said...

If the wood is new and has a good texture, I wipe it with linseed oil, so that stresses in the grain (dry) layer with several layers of poly.

If the grain is not as good or stains, use a good quality wipeing stain to the color match, then poly coat.

chays said...

With a grade of wooden furniture, sand, but until the dust polyeurathne after a few layers of beans and receive luster Natura get ... If you are unsure, you save a piece of scrap, and try ... Trust me, I love you

chays said...

With a grade of wooden furniture, sand, but until the dust polyeurathne after a few layers of beans and receive luster Natura get ... If you are unsure, you save a piece of scrap, and try ... Trust me, I love you

FredD said...

Of course, there is no right answer - it depends on what appears to us to leave. One option I have seen here is simple and easily available in shops or hardware stores in wood and is the maker of high-end furniture favors. Orange shellac really underscores the beauty and warmth of nuts like no other exit. Shellac is easy to use (foam brush or cloth on the ball works well in multiples can be applied), and several layers in a short period of time. A disadvantage is that it protects the wood against water damage shellac, but not looking at other options.
It is a book about Bob Flexner arrived and that means understanding wood is covered. I think it is the best book on this topic. Bob is well versed in these matters - he has over 30 years.
Good luck.

Mr. Versatile said...

Some companies, such as Menards, have small samples of spotted for sale. This condition could be a good idea, you have somewhere to try something in a sample of walnut. Most of us do not.
Start with a lighter color because you can always dark when you (I want to prefer Varathan Golden Mahogany "Personally, what really), the grain and color. Varathan is a brand of good quality, good value and good looks. Make sure to use also use a good conditioner a lot of wood under the stain, which gives the best color and grain, and not let the stain penetrate quickly. Good old Elbow Grease is the best tool, rub with the grain to avoid a lot and frequently change rags, reiterated its request that the patch will take only one side.
To make absolutely beautiful box to apply a final coating film. The coating is similar to a gym floor and fully protect the tabletop. I have it on my table in solid oak and WOW! All were impressed, and not always about the water cycles on the table concernsTop E! Be sure to follow the application.
Hope this helps!

Mr. Versatile said...

Some companies, such as Menards, have small samples of spotted for sale. This condition could be a good idea, you have somewhere to try something in a sample of walnut. Most of us do not.
Start with a lighter color because you can always dark when you (I want to prefer Varathan Golden Mahogany "Personally, what really), the grain and color. Varathan is a brand of good quality, good value and good looks. Make sure to use also use a good conditioner a lot of wood under the stain, which gives the best color and grain, and not let the stain penetrate quickly. Good old Elbow Grease is the best tool, rub with the grain to avoid a lot and frequently change rags, reiterated its request that the patch will take only one side.
To make absolutely beautiful box to apply a final coating film. The coating is similar to a gym floor and fully protect the tabletop. I have it on my table in solid oak and WOW! All were impressed, and not always about the water cycles on the table concernsTop E! Be sure to follow the application.
Hope this helps!

Post a Comment